Sound bathe transducer exciter attache to bath

Install sound bathe and convert your bath into a speaker.

Installing sound bathe and convert your bath into a speaker could not be simpler just follow the instructions below.

Simple Installation

Just fix the transducers on your bath and then plug in the bluetooth amp and your ready to go.

Step one – Transducer and attachment plate.

Bath transducer and attachment plate
Bath transducer and attachment plate

Before mounting to the bath, clean the surface where the plates will go.  The surface should be free from dust and dirt, such that the glue will not fail. 

Peel the double sided tape from the glue pad (on the plastic plate).  Then apply a small amount of Loctite glue (enclosed) on the plastic plate, around the glue pad, for extra adhesion.

Fix the plates to the head end of the bath.  Position the plates at left and right sides, around the water level, such that when relaxing in the bath, the speakers are at head height.

Allow the glue to dry for 30 minutes

Step two – Powering the bluetooth sound bathe speaker.

Sound bathe attachment panel and power supply wall plug
Sound bathe attachment panel and power supply wall plug

The plug socket should be located in a dry area, under the bath, in an adjacent room or loft space, etc.  If you install the power supply under your bath. Then the bath panel must be mechanically fixed in place.

Step Three – Fit transducers and powerup.

Sound bathe transducer exciter attache to bath
Sound bathe transducer exciter attache to bath

Now simply fit the transducers to the plates attached to the bath.

Then plug the system into the mains and search for Bluetooth devices using your phone, tablet, etc.

General Advice

To control the volume or the music selection this is done via your bluetooth device. Just connect your phone and then play your foratate tunes from spotify

The amplifier should be located to give the best bluetooth signal, free from interference.  If the sound becomes distorted, reduce the volume.

The speakers and amplifier are IP rated. 

The system is designed to withstand incidental exposure to water, but It is not designed to withstand constant immersion in water.

Got any Questions

If you have any questions please get in touch for more information.

Either Call Us on 01484 851717 or fill out our contact form here

Sound Bathe bluetooth bath transduces

The sound bathe bluetooth sound system is supplied by Techvision AV limited. For more information please take a look at the Techvison Website.

Leave a Reply

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping